Gotoh SG381-07 MG-T Locking Tuners, 3+3 (Chrome)

Epiphone list Grover Rotomatic 18:1 tuners on this guitar but don't publish the hole size. Modern sealed and locking tuners like these normally sit in 10mm holes. Gotoh's SG381-07 MG-T locking set (SG381-07 MGT L3+R3 C) is sold for 10mm holes, and each tuner is fixed with one screw set at 45 degrees to the post, so if your tuners use two guide pins or a screw in a different spot you may need to drill one small pilot hole per tuner. Take one tuner off and check the hole and where the screw or pins sit before ordering.

Epiphone list Grover Rotomatic tuners on this guitar but don't publish the hole size. Modern sealed and locking tuners like these normally sit in 10mm holes. Gotoh's SG381-07 MG-T locking set (SG381-07 MGT L3+R3 C) is sold for 10mm holes, and each tuner is fixed with one screw set at 45 degrees to the post, so if your tuners use two guide pins or a screw in a different spot you may need to drill one small pilot hole per tuner. Take one tuner off and check the hole and where the screw or pins sit before ordering.

ESP list Gotoh locking tuners on this guitar but don't publish the hole size. Modern sealed and locking tuners like these normally sit in 10mm holes. Gotoh's SG381-07 MG-T locking set (SG381-07 MGT L3+R3 C) is sold for 10mm holes, and each tuner is fixed with one screw set at 45 degrees to the post, so if your tuners use two guide pins or a screw in a different spot you may need to drill one small pilot hole per tuner. Hipshot note that Eclipse headstocks have their screw holes at 45 degrees to the tuner, the same angle as Gotoh's screw, so the existing holes may line up. Take one tuner off and check the hole and where the screw or pins sit before ordering.

ESP list Gotoh locking tuners on this guitar but don't publish the hole size. Modern sealed and locking tuners like these normally sit in 10mm holes. Gotoh's SG381-07 MG-T locking set (SG381-07 MGT L3+R3 C) is sold for 10mm holes, and each tuner is fixed with one screw set at 45 degrees to the post, so if your tuners use two guide pins or a screw in a different spot you may need to drill one small pilot hole per tuner. Hipshot note that Eclipse headstocks have their screw holes at 45 degrees to the tuner, the same angle as Gotoh's screw, so the existing holes may line up. Take one tuner off and check the hole and where the screw or pins sit before ordering.

ESP list Gotoh locking tuners on this guitar but don't publish the hole size. Modern sealed and locking tuners like these normally sit in 10mm holes. Gotoh's SG381-07 MG-T locking set (SG381-07 MGT L3+R3 C) is sold for 10mm holes, and each tuner is fixed with one screw set at 45 degrees to the post, so if your tuners use two guide pins or a screw in a different spot you may need to drill one small pilot hole per tuner. Hipshot note that Eclipse headstocks have their screw holes at 45 degrees to the tuner, the same angle as Gotoh's screw, so the existing holes may line up. Take one tuner off and check the hole and where the screw or pins sit before ordering.

ESP list Gotoh locking tuners on this guitar but don't publish the hole size. Modern sealed and locking tuners like these normally sit in 10mm holes. Gotoh's SG381-07 MG-T locking set (SG381-07 MGT L3+R3 C) is sold for 10mm holes, and each tuner is fixed with one screw set at 45 degrees to the post, so if your tuners use two guide pins or a screw in a different spot you may need to drill one small pilot hole per tuner. Hipshot note that Eclipse headstocks have their screw holes at 45 degrees to the tuner, the same angle as Gotoh's screw, so the existing holes may line up. Take one tuner off and check the hole and where the screw or pins sit before ordering.

ESP list Gotoh locking tuners on this guitar but don't publish the hole size. Modern sealed and locking tuners like these normally sit in 10mm holes. Gotoh's SG381-07 MG-T locking set (SG381-07 MGT L3+R3 C) is sold for 10mm holes, and each tuner is fixed with one screw set at 45 degrees to the post, so if your tuners use two guide pins or a screw in a different spot you may need to drill one small pilot hole per tuner. Hipshot note that Eclipse headstocks have their screw holes at 45 degrees to the tuner, the same angle as Gotoh's screw, so the existing holes may line up. Take one tuner off and check the hole and where the screw or pins sit before ordering.

ESP list Gotoh locking tuners on this guitar but don't publish the hole size. Modern sealed and locking tuners like these normally sit in 10mm holes. Gotoh's SG381-07 MG-T locking set (SG381-07 MGT L3+R3 C) is sold for 10mm holes, and each tuner is fixed with one screw set at 45 degrees to the post, so if your tuners use two guide pins or a screw in a different spot you may need to drill one small pilot hole per tuner. Hipshot note that Eclipse headstocks have their screw holes at 45 degrees to the tuner, the same angle as Gotoh's screw, so the existing holes may line up. Take one tuner off and check the hole and where the screw or pins sit before ordering.

ESP list Gotoh locking tuners on this guitar but don't publish the hole size. Modern sealed and locking tuners like these normally sit in 10mm holes. Gotoh's SG381-07 MG-T locking set (SG381-07 MGT L3+R3 C) is sold for 10mm holes, and each tuner is fixed with one screw set at 45 degrees to the post, so if your tuners use two guide pins or a screw in a different spot you may need to drill one small pilot hole per tuner. Hipshot note that Eclipse headstocks have their screw holes at 45 degrees to the tuner, the same angle as Gotoh's screw, so the existing holes may line up. Take one tuner off and check the hole and where the screw or pins sit before ordering.

ESP list Gotoh locking tuners on this guitar but don't publish the hole size. Modern sealed and locking tuners like these normally sit in 10mm holes. Gotoh's SG381-07 MG-T locking set (SG381-07 MGT L3+R3 C) is sold for 10mm holes, and each tuner is fixed with one screw set at 45 degrees to the post, so if your tuners use two guide pins or a screw in a different spot you may need to drill one small pilot hole per tuner. Hipshot note that Eclipse headstocks have their screw holes at 45 degrees to the tuner, the same angle as Gotoh's screw, so the existing holes may line up. Take one tuner off and check the hole and where the screw or pins sit before ordering.

Gibson list Grover Rotomatic tuners on this guitar but don't publish the hole size. Modern sealed and locking tuners like these normally sit in 10mm holes. Gotoh's SG381-07 MG-T locking set (SG381-07 MGT L3+R3 C) is sold for 10mm holes, and each tuner is fixed with one screw set at 45 degrees to the post, so if your tuners use two guide pins or a screw in a different spot you may need to drill one small pilot hole per tuner. Take one tuner off and check the hole and where the screw or pins sit before ordering.

Gibson list Grover Rotomatic tuners on this guitar but don't publish the hole size. Modern sealed and locking tuners like these normally sit in 10mm holes. Gotoh's SG381-07 MG-T locking set (SG381-07 MGT L3+R3 C) is sold for 10mm holes, and each tuner is fixed with one screw set at 45 degrees to the post, so if your tuners use two guide pins or a screw in a different spot you may need to drill one small pilot hole per tuner. Take one tuner off and check the hole and where the screw or pins sit before ordering.

Gibson list Grover Locking Rotomatic tuners on this guitar but don't publish the hole size. Modern sealed and locking tuners like these normally sit in 10mm holes. Gotoh's SG381-07 MG-T locking set (SG381-07 MGT L3+R3 C) is sold for 10mm holes, and each tuner is fixed with one screw set at 45 degrees to the post, so if your tuners use two guide pins or a screw in a different spot you may need to drill one small pilot hole per tuner. Take one tuner off and check the hole and where the screw or pins sit before ordering.

Gibson list Grover Rotomatic tuners on this guitar but don't publish the hole size. Modern sealed and locking tuners like these normally sit in 10mm holes. Gotoh's SG381-07 MG-T locking set (SG381-07 MGT L3+R3 C) is sold for 10mm holes, and each tuner is fixed with one screw set at 45 degrees to the post, so if your tuners use two guide pins or a screw in a different spot you may need to drill one small pilot hole per tuner. Take one tuner off and check the hole and where the screw or pins sit before ordering.

Gibson list Grover Rotomatic tuners on this guitar but don't publish the hole size. Modern sealed and locking tuners like these normally sit in 10mm holes. Gotoh's SG381-07 MG-T locking set (SG381-07 MGT L3+R3 C) is sold for 10mm holes, and each tuner is fixed with one screw set at 45 degrees to the post, so if your tuners use two guide pins or a screw in a different spot you may need to drill one small pilot hole per tuner. Take one tuner off and check the hole and where the screw or pins sit before ordering.

Gibson list Grover Rotomatic tuners on this guitar but don't publish the hole size. Modern sealed and locking tuners like these normally sit in 10mm holes. Gotoh's SG381-07 MG-T locking set (SG381-07 MGT L3+R3 C) is sold for 10mm holes, and each tuner is fixed with one screw set at 45 degrees to the post, so if your tuners use two guide pins or a screw in a different spot you may need to drill one small pilot hole per tuner. Take one tuner off and check the hole and where the screw or pins sit before ordering.

Gibson list Grover Rotomatic tuners on this guitar but don't publish the hole size. Modern sealed and locking tuners like these normally sit in 10mm holes. Gotoh's SG381-07 MG-T locking set (SG381-07 MGT L3+R3 C) is sold for 10mm holes, and each tuner is fixed with one screw set at 45 degrees to the post, so if your tuners use two guide pins or a screw in a different spot you may need to drill one small pilot hole per tuner. Take one tuner off and check the hole and where the screw or pins sit before ordering.

Schecter list Schecter locking tuners on this guitar but don't publish the hole size. Modern sealed and locking tuners like these normally sit in 10mm holes. Gotoh's SG381-07 MG-T locking set (SG381-07 MGT L3+R3 C) is sold for 10mm holes, and each tuner is fixed with one screw set at 45 degrees to the post, so if your tuners use two guide pins or a screw in a different spot you may need to drill one small pilot hole per tuner. Take one tuner off and check the hole and where the screw or pins sit before ordering.

Yamaha list die-cast tuners on this guitar but don't publish the hole size. Modern sealed and locking tuners like these normally sit in 10mm holes. Gotoh's SG381-07 MG-T locking set (SG381-07 MGT L3+R3 C) is sold for 10mm holes, and each tuner is fixed with one screw set at 45 degrees to the post, so if your tuners use two guide pins or a screw in a different spot you may need to drill one small pilot hole per tuner. Take one tuner off and check the hole and where the screw or pins sit before ordering.

Gotoh specify a 10mm bore for the SG381 housing. Epiphone list the standard ES-335 with Epiphone Deluxe tuners and don't publish the hole size, so it isn't known whether the holes are the modern 10mm or a smaller vintage size. Take one tuner off and measure: 10mm means it drops in, anything smaller means the holes need reaming.

Fitted one of these? Tell us how it went

Epiphone don't publish the tuner hole size or mounting for this guitar. Gotoh's SG381 is fixed with one screw set at 45 degrees to the post, and retailers list it for 10mm holes. The listing we link doesn't give Gotoh's full part number. Take one tuner off, measure the hole and check where the screw or pins sit before ordering.

Fitted one of these? Tell us how it went

Built for a 10mm tuner hole. Epiphone list this model with Epiphone Vintage Deluxe tuners and don't publish the hole size. Some owners report 10mm holes, but vintage-style tuners can sit in smaller holes. Take one tuner off and measure: 10mm means it drops in, anything smaller means the holes need reaming.

Fitted one of these? Tell us how it went

LTD EC series shares the same Eclipse-body headstock design, nonstandard angled screw mount.

Fitted one of these? Tell us how it went

Listings reproducing ESP's spec for the LTD Viper-400 give the tuners only as Grover, with no model named, and ESP don't publish the tuner hole size. This set needs 10mm holes. Take one tuner off and measure the hole in your headstock before ordering.

Fitted one of these? Tell us how it went

Gotoh specify a 10mm bore for the SG381 housing. Gibson list this guitar with Vintage Deluxe tuners with keystone buttons and don't publish the hole size. Gibson's Deluxe-style tuners come in push-in bushing versions, which sit in smaller vintage holes, and screw-in bushing versions, which need larger holes, so the hole size on this guitar isn't known. Take one tuner off and measure: 10mm means a straight swap, anything smaller means reaming.

Fitted one of these? Tell us how it went

Gibson don't publish the tuner hole size or mounting for this guitar. Gotoh's SG381 is fixed with one screw set at 45 degrees to the post, and retailers list it for 10mm holes. The listing we link doesn't give Gotoh's full part number. Take one tuner off, measure the hole and check where the screw or pins sit before ordering.

Fitted one of these? Tell us how it went

Gotoh specify a 10mm bore for the SG381 housing. Gibson list this guitar with Vintage Deluxe tuners with keystone buttons and don't publish the hole size. Gibson's Deluxe-style tuners come in push-in bushing versions, which sit in smaller vintage holes, and screw-in bushing versions, which need larger holes, so the hole size on this guitar isn't known. Take one tuner off and measure: 10mm means a straight swap, anything smaller means reaming.

Fitted one of these? Tell us how it went

Gretsch tuner mounting conventions vary by model and this has not been confirmed for the G6120T specifically.

Fitted one of these? Tell us how it went