Modio Pick LogoModio
    Tuner

    Hipshot Grip-Lock UMP Upgrade Kit, 10mm (3+3, Chrome)

    Hipshot's enclosed Grip-Lock locking tuners as a 3+3 kit with their Universal Mount Plate, made to replace modern tuners in 10mm holes without drilling.

    24 guitars checked: 24 needs verification.

    Tuner illustrationIllustration, photo coming soon

    Where to buy

    Muziker

    £80.50In stock
    Buy direct from Muziker

    We may earn a commission if you buy through links on this page. It doesn't change the price you pay. How we make money

    Part specs

    Tuner hole size

    10mm

    Gear ratio

    15:1

    Mounting pattern

    No drilling: Hipshot's Universal Mount Plate clamps to the existing 13/32 inch (10mm) holes with reach nuts and washers. The 3+3 plates overlap and adjust for tuner spacing between 31.9mm and 43.4mm (Hipshot drawing). All posts 21mm.

    Installation notes

    Remove the old tuners and their bushings, fit the plates, then fit the tuners through them with the reach nuts. Hipshot say the only tool needed is a 10mm wrench.

    Fit info is our best reading of published specs and owner reports. Guitars can vary by year and factory, so check your own before you buy. How we check fit

    Guitars we've checked

    24 guitars checked: 24 needs verification.

    Epiphone Flying V 70s

    Epiphone

    Flying V 70s

    Needs verification

    Fits 10mm holes with no drilling, as long as your tuners sit between 31.9mm and 43.4mm apart. Hipshot don't list models, so measure yours first.

    Why we say this

    Hipshot make this kit (6K2EL0C) for 13/32 inch (10mm) tuner holes, the size most modern sealed and locking tuners use. We haven't found a published tuner hole size for this guitar. The Universal Mount Plate clamps to the existing holes with reach nuts, so Hipshot say no drilling is needed and the original tuners can go back on with no marks. Hipshot's drawing shows the 3+3 plates adjusting for tuner spacing between 31.9mm and 43.4mm, centre to centre along each side, but they don't publish a list of guitars it fits. Take one tuner off to check the hole is 10mm, and measure the gap between two neighbouring tuners before ordering.

    Epiphone Les Paul Custom

    Epiphone

    Les Paul Custom 2020

    Needs verification

    Fits 10mm holes with no drilling, as long as your tuners sit between 31.9mm and 43.4mm apart. Hipshot don't list models, so measure yours first.

    Why we say this

    Hipshot make this kit (6K2EL0C) for 13/32 inch (10mm) tuner holes, the size most modern sealed and locking tuners use. Epiphone list Grover Rotomatic tuners on this guitar, and Grover give a 25/64 inch (10mm) hole for that series. The Universal Mount Plate clamps to the existing holes with reach nuts, so Hipshot say no drilling is needed and the original tuners can go back on with no marks. Hipshot's drawing shows the 3+3 plates adjusting for tuner spacing between 31.9mm and 43.4mm, centre to centre along each side, but they don't publish a list of guitars it fits. Take one tuner off to check the hole is 10mm, and measure the gap between two neighbouring tuners before ordering.

    Epiphone Les Paul Standard 60s

    Epiphone

    Les Paul Standard 60s 2020

    Needs verification

    Fits 10mm holes with no drilling, as long as your tuners sit between 31.9mm and 43.4mm apart. Hipshot don't list models, so measure yours first.

    Why we say this

    Hipshot make this kit (6K2EL0C) for 13/32 inch (10mm) tuner holes, the size most modern sealed and locking tuners use. Epiphone list Grover Rotomatic tuners on this guitar, and Grover give a 25/64 inch (10mm) hole for that series. The Universal Mount Plate clamps to the existing holes with reach nuts, so Hipshot say no drilling is needed and the original tuners can go back on with no marks. Hipshot's drawing shows the 3+3 plates adjusting for tuner spacing between 31.9mm and 43.4mm, centre to centre along each side, but they don't publish a list of guitars it fits. Take one tuner off to check the hole is 10mm, and measure the gap between two neighbouring tuners before ordering.

    Epiphone SG Standard

    Epiphone

    SG Standard 2020

    Needs verification

    Fits 10mm holes with no drilling, as long as your tuners sit between 31.9mm and 43.4mm apart. Hipshot don't list models, so measure yours first.

    Why we say this

    Hipshot make this kit (6K2EL0C) for 13/32 inch (10mm) tuner holes, the size most modern sealed and locking tuners use. Epiphone list Grover Rotomatic tuners on this guitar, and Grover give a 25/64 inch (10mm) hole for that series. The Universal Mount Plate clamps to the existing holes with reach nuts, so Hipshot say no drilling is needed and the original tuners can go back on with no marks. Hipshot's drawing shows the 3+3 plates adjusting for tuner spacing between 31.9mm and 43.4mm, centre to centre along each side, but they don't publish a list of guitars it fits. Take one tuner off to check the hole is 10mm, and measure the gap between two neighbouring tuners before ordering.

    ESP

    E-II Eclipse 2022

    Needs verification

    Fits 10mm holes with no drilling, as long as your tuners sit between 31.9mm and 43.4mm apart. Hipshot don't list models, so measure yours first.

    Why we say this

    Hipshot make this kit (6K2EL0C) for 13/32 inch (10mm) tuner holes, the size most modern sealed and locking tuners use. We haven't found a published tuner hole size for this guitar. The Universal Mount Plate clamps to the existing holes with reach nuts, so Hipshot say no drilling is needed and the original tuners can go back on with no marks. Hipshot's drawing shows the 3+3 plates adjusting for tuner spacing between 31.9mm and 43.4mm, centre to centre along each side, but they don't publish a list of guitars it fits. Take one tuner off to check the hole is 10mm, and measure the gap between two neighbouring tuners before ordering.

    ESP

    E-II Eclipse EMG 57TW and 66TW

    Needs verification

    Fits 10mm holes with no drilling, as long as your tuners sit between 31.9mm and 43.4mm apart. Hipshot don't list models, so measure yours first.

    Why we say this

    Hipshot make this kit (6K2EL0C) for 13/32 inch (10mm) tuner holes, the size most modern sealed and locking tuners use. We haven't found a published tuner hole size for this guitar. The Universal Mount Plate clamps to the existing holes with reach nuts, so Hipshot say no drilling is needed and the original tuners can go back on with no marks. Hipshot's drawing shows the 3+3 plates adjusting for tuner spacing between 31.9mm and 43.4mm, centre to centre along each side, but they don't publish a list of guitars it fits. Take one tuner off to check the hole is 10mm, and measure the gap between two neighbouring tuners before ordering.

    ESP

    E-II Eclipse EverTune 2022

    Needs verification

    Fits 10mm holes with no drilling, as long as your tuners sit between 31.9mm and 43.4mm apart. Hipshot don't list models, so measure yours first.

    Why we say this

    Hipshot make this kit (6K2EL0C) for 13/32 inch (10mm) tuner holes, the size most modern sealed and locking tuners use. We haven't found a published tuner hole size for this guitar. The Universal Mount Plate clamps to the existing holes with reach nuts, so Hipshot say no drilling is needed and the original tuners can go back on with no marks. Hipshot's drawing shows the 3+3 plates adjusting for tuner spacing between 31.9mm and 43.4mm, centre to centre along each side, but they don't publish a list of guitars it fits. Take one tuner off to check the hole is 10mm, and measure the gap between two neighbouring tuners before ordering.

    ESP

    E-II Eclipse Fluence Modern

    Needs verification

    Fits 10mm holes with no drilling, as long as your tuners sit between 31.9mm and 43.4mm apart. Hipshot don't list models, so measure yours first.

    Why we say this

    Hipshot make this kit (6K2EL0C) for 13/32 inch (10mm) tuner holes, the size most modern sealed and locking tuners use. We haven't found a published tuner hole size for this guitar. The Universal Mount Plate clamps to the existing holes with reach nuts, so Hipshot say no drilling is needed and the original tuners can go back on with no marks. Hipshot's drawing shows the 3+3 plates adjusting for tuner spacing between 31.9mm and 43.4mm, centre to centre along each side, but they don't publish a list of guitars it fits. Take one tuner off to check the hole is 10mm, and measure the gap between two neighbouring tuners before ordering.

    ESP

    E-II Eclipse FR

    Needs verification

    Fits 10mm holes with no drilling, as long as your tuners sit between 31.9mm and 43.4mm apart. Hipshot don't list models, so measure yours first.

    Why we say this

    Hipshot make this kit (6K2EL0C) for 13/32 inch (10mm) tuner holes, the size most modern sealed and locking tuners use. We haven't found a published tuner hole size for this guitar. The Universal Mount Plate clamps to the existing holes with reach nuts, so Hipshot say no drilling is needed and the original tuners can go back on with no marks. Hipshot's drawing shows the 3+3 plates adjusting for tuner spacing between 31.9mm and 43.4mm, centre to centre along each side, but they don't publish a list of guitars it fits. Take one tuner off to check the hole is 10mm, and measure the gap between two neighbouring tuners before ordering.

    ESP

    E-II Eclipse Full Thickness 2022

    Needs verification

    Fits 10mm holes with no drilling, as long as your tuners sit between 31.9mm and 43.4mm apart. Hipshot don't list models, so measure yours first.

    Why we say this

    Hipshot make this kit (6K2EL0C) for 13/32 inch (10mm) tuner holes, the size most modern sealed and locking tuners use. We haven't found a published tuner hole size for this guitar. The Universal Mount Plate clamps to the existing holes with reach nuts, so Hipshot say no drilling is needed and the original tuners can go back on with no marks. Hipshot's drawing shows the 3+3 plates adjusting for tuner spacing between 31.9mm and 43.4mm, centre to centre along each side, but they don't publish a list of guitars it fits. Take one tuner off to check the hole is 10mm, and measure the gap between two neighbouring tuners before ordering.

    ESP

    E-II Eclipse Full Thickness EverTune 2022

    Needs verification

    Fits 10mm holes with no drilling, as long as your tuners sit between 31.9mm and 43.4mm apart. Hipshot don't list models, so measure yours first.

    Why we say this

    Hipshot make this kit (6K2EL0C) for 13/32 inch (10mm) tuner holes, the size most modern sealed and locking tuners use. We haven't found a published tuner hole size for this guitar. The Universal Mount Plate clamps to the existing holes with reach nuts, so Hipshot say no drilling is needed and the original tuners can go back on with no marks. Hipshot's drawing shows the 3+3 plates adjusting for tuner spacing between 31.9mm and 43.4mm, centre to centre along each side, but they don't publish a list of guitars it fits. Take one tuner off to check the hole is 10mm, and measure the gap between two neighbouring tuners before ordering.

    ESP

    E-II Eclipse Full Thickness Fluence

    Needs verification

    Fits 10mm holes with no drilling, as long as your tuners sit between 31.9mm and 43.4mm apart. Hipshot don't list models, so measure yours first.

    Why we say this

    Hipshot make this kit (6K2EL0C) for 13/32 inch (10mm) tuner holes, the size most modern sealed and locking tuners use. We haven't found a published tuner hole size for this guitar. The Universal Mount Plate clamps to the existing holes with reach nuts, so Hipshot say no drilling is needed and the original tuners can go back on with no marks. Hipshot's drawing shows the 3+3 plates adjusting for tuner spacing between 31.9mm and 43.4mm, centre to centre along each side, but they don't publish a list of guitars it fits. Take one tuner off to check the hole is 10mm, and measure the gap between two neighbouring tuners before ordering.

    ESP LTD EC-1000

    ESP

    LTD EC-1000 2023

    Needs verification

    Fits 10mm holes with no drilling, as long as your tuners sit between 31.9mm and 43.4mm apart. Hipshot don't list models, so measure yours first.

    Why we say this

    Hipshot make this kit (6K2EL0C) for 13/32 inch (10mm) tuner holes, the size most modern sealed and locking tuners use. We haven't found a published tuner hole size for this guitar. The Universal Mount Plate clamps to the existing holes with reach nuts, so Hipshot say no drilling is needed and the original tuners can go back on with no marks. Hipshot's drawing shows the 3+3 plates adjusting for tuner spacing between 31.9mm and 43.4mm, centre to centre along each side, but they don't publish a list of guitars it fits. Take one tuner off to check the hole is 10mm, and measure the gap between two neighbouring tuners before ordering.

    ESP LTD Viper 400

    ESP

    LTD Viper 400 2021

    Needs verification

    Fits 10mm holes with no drilling, as long as your tuners sit between 31.9mm and 43.4mm apart. Hipshot don't list models, so measure yours first.

    Why we say this

    Hipshot make this kit (6K2EL0C) for 13/32 inch (10mm) tuner holes, the size most modern sealed and locking tuners use. We haven't found a published tuner hole size for this guitar. The Universal Mount Plate clamps to the existing holes with reach nuts, so Hipshot say no drilling is needed and the original tuners can go back on with no marks. Hipshot's drawing shows the 3+3 plates adjusting for tuner spacing between 31.9mm and 43.4mm, centre to centre along each side, but they don't publish a list of guitars it fits. Take one tuner off to check the hole is 10mm, and measure the gap between two neighbouring tuners before ordering.

    Gibson

    ES-339 2021

    Needs verification

    Fits 10mm holes with no drilling, as long as your tuners sit between 31.9mm and 43.4mm apart. Hipshot don't list models, so measure yours first.

    Why we say this

    Hipshot make this kit (6K2EL0C) for 13/32 inch (10mm) tuner holes, the size most modern sealed and locking tuners use. Gibson list Grover Rotomatic tuners on this guitar, and Grover give a 25/64 inch (10mm) hole for that series. The Universal Mount Plate clamps to the existing holes with reach nuts, so Hipshot say no drilling is needed and the original tuners can go back on with no marks. Hipshot's drawing shows the 3+3 plates adjusting for tuner spacing between 31.9mm and 43.4mm, centre to centre along each side, but they don't publish a list of guitars it fits. Take one tuner off to check the hole is 10mm, and measure the gap between two neighbouring tuners before ordering.

    Gibson

    Flying V 2019

    Needs verification

    Fits 10mm holes with no drilling, as long as your tuners sit between 31.9mm and 43.4mm apart. Hipshot don't list models, so measure yours first.

    Why we say this

    Hipshot make this kit (6K2EL0C) for 13/32 inch (10mm) tuner holes, the size most modern sealed and locking tuners use. We haven't found a published tuner hole size for this guitar. The Universal Mount Plate clamps to the existing holes with reach nuts, so Hipshot say no drilling is needed and the original tuners can go back on with no marks. Hipshot's drawing shows the 3+3 plates adjusting for tuner spacing between 31.9mm and 43.4mm, centre to centre along each side, but they don't publish a list of guitars it fits. Take one tuner off to check the hole is 10mm, and measure the gap between two neighbouring tuners before ordering.

    Gibson Les Paul Classic

    Gibson

    Les Paul Classic 2023

    Needs verification

    Fits 10mm holes with no drilling, as long as your tuners sit between 31.9mm and 43.4mm apart. Hipshot don't list models, so measure yours first.

    Why we say this

    Hipshot make this kit (6K2EL0C) for 13/32 inch (10mm) tuner holes, the size most modern sealed and locking tuners use. Gibson list Grover Rotomatic tuners on this guitar, and Grover give a 25/64 inch (10mm) hole for that series. The Universal Mount Plate clamps to the existing holes with reach nuts, so Hipshot say no drilling is needed and the original tuners can go back on with no marks. Hipshot's drawing shows the 3+3 plates adjusting for tuner spacing between 31.9mm and 43.4mm, centre to centre along each side, but they don't publish a list of guitars it fits. Take one tuner off to check the hole is 10mm, and measure the gap between two neighbouring tuners before ordering.

    Gibson

    Les Paul Modern 2020

    Needs verification

    Fits 10mm holes with no drilling, as long as your tuners sit between 31.9mm and 43.4mm apart. Hipshot don't list models, so measure yours first.

    Why we say this

    Hipshot make this kit (6K2EL0C) for 13/32 inch (10mm) tuner holes, the size most modern sealed and locking tuners use. Gibson list Grover Locking Rotomatic tuners on this guitar, and Grover give a 25/64 inch (10mm) hole for that series. The Universal Mount Plate clamps to the existing holes with reach nuts, so Hipshot say no drilling is needed and the original tuners can go back on with no marks. Hipshot's drawing shows the 3+3 plates adjusting for tuner spacing between 31.9mm and 43.4mm, centre to centre along each side, but they don't publish a list of guitars it fits. Take one tuner off to check the hole is 10mm, and measure the gap between two neighbouring tuners before ordering.

    Gibson Les Paul Standard 60s

    Gibson

    Les Paul Standard 60s 2023

    Needs verification

    Fits 10mm holes with no drilling, as long as your tuners sit between 31.9mm and 43.4mm apart. Hipshot don't list models, so measure yours first.

    Why we say this

    Hipshot make this kit (6K2EL0C) for 13/32 inch (10mm) tuner holes, the size most modern sealed and locking tuners use. Gibson list Grover Rotomatic tuners on this guitar, and Grover give a 25/64 inch (10mm) hole for that series. The Universal Mount Plate clamps to the existing holes with reach nuts, so Hipshot say no drilling is needed and the original tuners can go back on with no marks. Hipshot's drawing shows the 3+3 plates adjusting for tuner spacing between 31.9mm and 43.4mm, centre to centre along each side, but they don't publish a list of guitars it fits. Take one tuner off to check the hole is 10mm, and measure the gap between two neighbouring tuners before ordering.

    Gibson SG Standard

    Gibson

    SG Standard 2023

    Needs verification

    Fits 10mm holes with no drilling, as long as your tuners sit between 31.9mm and 43.4mm apart. Hipshot don't list models, so measure yours first.

    Why we say this

    Hipshot make this kit (6K2EL0C) for 13/32 inch (10mm) tuner holes, the size most modern sealed and locking tuners use. Gibson list Grover Rotomatic tuners on this guitar, and Grover give a 25/64 inch (10mm) hole for that series. The Universal Mount Plate clamps to the existing holes with reach nuts, so Hipshot say no drilling is needed and the original tuners can go back on with no marks. Hipshot's drawing shows the 3+3 plates adjusting for tuner spacing between 31.9mm and 43.4mm, centre to centre along each side, but they don't publish a list of guitars it fits. Take one tuner off to check the hole is 10mm, and measure the gap between two neighbouring tuners before ordering.

    Gretsch

    G2622 Streamliner 2023

    Needs verification

    Fits 10mm holes with no drilling, as long as your tuners sit between 31.9mm and 43.4mm apart. Hipshot don't list models, so measure yours first.

    Why we say this

    Hipshot make this kit (6K2EL0C) for 13/32 inch (10mm) tuner holes, the size most modern sealed and locking tuners use. We haven't found a published tuner hole size for this guitar. The Universal Mount Plate clamps to the existing holes with reach nuts, so Hipshot say no drilling is needed and the original tuners can go back on with no marks. Hipshot's drawing shows the 3+3 plates adjusting for tuner spacing between 31.9mm and 43.4mm, centre to centre along each side, but they don't publish a list of guitars it fits. Take one tuner off to check the hole is 10mm, and measure the gap between two neighbouring tuners before ordering.

    Gretsch

    G6120T 2022

    Needs verification

    Fits 10mm holes with no drilling, as long as your tuners sit between 31.9mm and 43.4mm apart. Hipshot don't list models, so measure yours first.

    Why we say this

    Hipshot make this kit (6K2EL0C) for 13/32 inch (10mm) tuner holes, the size most modern sealed and locking tuners use. We haven't found a published tuner hole size for this guitar. The Universal Mount Plate clamps to the existing holes with reach nuts, so Hipshot say no drilling is needed and the original tuners can go back on with no marks. Hipshot's drawing shows the 3+3 plates adjusting for tuner spacing between 31.9mm and 43.4mm, centre to centre along each side, but they don't publish a list of guitars it fits. Take one tuner off to check the hole is 10mm, and measure the gap between two neighbouring tuners before ordering.

    Schecter

    C-1 Hellraiser 2022

    Needs verification

    Fits 10mm holes with no drilling, as long as your tuners sit between 31.9mm and 43.4mm apart. Hipshot don't list models, so measure yours first.

    Why we say this

    Hipshot make this kit (6K2EL0C) for 13/32 inch (10mm) tuner holes, the size most modern sealed and locking tuners use. We haven't found a published tuner hole size for this guitar. The Universal Mount Plate clamps to the existing holes with reach nuts, so Hipshot say no drilling is needed and the original tuners can go back on with no marks. Hipshot's drawing shows the 3+3 plates adjusting for tuner spacing between 31.9mm and 43.4mm, centre to centre along each side, but they don't publish a list of guitars it fits. Take one tuner off to check the hole is 10mm, and measure the gap between two neighbouring tuners before ordering.

    Yamaha Revstar RSS20

    Yamaha

    Revstar RSS20 2022

    Needs verification

    Fits 10mm holes with no drilling, as long as your tuners sit between 31.9mm and 43.4mm apart. Hipshot don't list models, so measure yours first.

    Why we say this

    Hipshot make this kit (6K2EL0C) for 13/32 inch (10mm) tuner holes, the size most modern sealed and locking tuners use. We haven't found a published tuner hole size for this guitar. The Universal Mount Plate clamps to the existing holes with reach nuts, so Hipshot say no drilling is needed and the original tuners can go back on with no marks. Hipshot's drawing shows the 3+3 plates adjusting for tuner spacing between 31.9mm and 43.4mm, centre to centre along each side, but they don't publish a list of guitars it fits. Take one tuner off to check the hole is 10mm, and measure the gap between two neighbouring tuners before ordering.

    This page has 24 open questions

    If you have fitted any of these to this Hipshot Grip-Lock UMP Upgrade Kit, 10mm (3+3, Chrome), tell us what you found and we'll update the data.