Tailpiece

Gotoh GE101Z Stop Tailpiece (Nickel)

A Japanese-made stop tailpiece with 82mm stud spacing and M8 metric studs, with bushings included.

1 guitar checked: 1 needs verification.

Illustration, photo coming soon

Where to buy

Thomann

See current price at ThomannIn stock

Buy direct from Thomann

We may earn a commission if you buy through links on this page. It doesn't change the price you pay. How we make money

Part specs

Tailpiece

Stopbar (metric)

Dimensions (L × W × D)

Not yet confirmed

Fit info is our best reading of published specs and owner reports. Guitars can vary by year and factory, so check your own before you buy. How we check fit

Guitars we've checked

1 guitar checked: 1 needs verification.

ESP

LTD EC-1000 2023

Needs verification

Not confirmed. ESP don't publish this guitar's tailpiece stud spacing or thread, so measure yours before buying.

Why we say this

ESP fit a TonePros locking Tune-O-Matic and tailpiece on this guitar but don't publish the tailpiece stud spacing or thread. Gotoh's GE101Z-N has 82mm stud spacing and M8 metric studs, with bushings included. Measure between your stud centres: if it's about 82mm and your studs are M8, it should go straight on. If the thread is different you'd need to swap the bushings, which is a job for a tech.

This page has 1 open question

If you have fitted any of these to this Gotoh GE101Z Stop Tailpiece (Nickel), tell us what you found and we'll update the data.