Pickup

Seymour Duncan Full Shred Trembucker TB-10 (Black)

The Full Shred is a tight, bright, articulate bridge humbucker with a slightly scooped midrange, built so fast single-note lines and harmonics stay clear under high gain.

1 guitar checked: 1 likely drop-in.

Illustration, photo coming soon

Where to buy

guitarguitar

£139.00In stock

Buy direct from guitarguitar

We may earn a commission if you buy through links on this page. It doesn't change the price you pay. How we make money

Part specs

Dimensions (L × W × D)

Not yet confirmed

Pickup type

Humbucker, Trembucker (wide 52.6mm pole spacing)

Installation notes

Bridge position. Four-conductor shielded cable, so coil splitting works. Solder-in.

Fit info is our best reading of published specs and owner reports. Guitars can vary by year and factory, so check your own before you buy. How we check fit

Guitars we've checked

1 guitar checked: 1 likely drop-in.

Charvel

Pro-Mod DK24 HH 2PT

Likely drop-in

Soldering

The exact bridge pickup this guitar ships with, so it fits the existing route. You will need to solder it in, and keep all four conductors for the guitar's coil switching.

Why we say this

Charvel list a Seymour Duncan Full Shred TB-10 in the bridge of the Pro-Mod DK24 HH 2PT (2962411500, 2962411303), in black, so this is the same pickup the guitar ships with. Duncan make Trembuckers with 52.6mm pole spacing to line up with tremolo string spacing, on slightly larger bobbins and baseplate than a standard humbucker, so a like-for-like Trembucker is the safe choice for this route. Four-conductor cable, which the DK24's five-way and series/parallel switching need.

Help improve this data

Nothing is flagged as an open question here right now. If you have fitted something to this Seymour Duncan Full Shred Trembucker TB-10 (Black) that we haven't covered, send it in.