Pickup

Seymour Duncan Distortion Trembucker TB-6 (Black)

The Distortion is Duncan's high-output ceramic bridge humbucker, hotter than the JB with lots of midrange push for heavy rhythm and lead playing.

2 guitars checked: 2 likely drop-in.

For your Charvel Pro-Mod So-Cal Style 1 HH FR

Likely drop-in

The same bridge pickup this guitar ships with, so it fits the existing route and pickguard cut-out. Black, so on the maple-board version it won't match the stock white. You will need to solder it in.

See the full notes below

Illustration, photo coming soon

Where to buy

Thomann

£95.00In stock

Buy direct from Thomann

We may earn a commission if you buy through links on this page. It doesn't change the price you pay. How we make money

Part specs

Dimensions (L × W × D)

Not yet confirmed

Pickup type

Humbucker, Trembucker (wide 52.6mm pole spacing)

Installation notes

Bridge position. Four-conductor shielded cable, so coil splitting works. Solder-in.

Fit info is our best reading of published specs and owner reports. Guitars can vary by year and factory, so check your own before you buy. How we check fit

Guitars we've checked

2 guitars checked: 2 likely drop-in.

Charvel

Pro-Mod So-Cal Style 1 HH FR

Likely drop-in

Soldering

The same bridge pickup this guitar ships with, so it fits the existing route and pickguard cut-out. Black, so on the maple-board version it won't match the stock white. You will need to solder it in.

Why we say this

Charvel list a Seymour Duncan Distortion TB-6 in the bridge of the Pro-Mod So-Cal Style 1 HH FR (white pickups on the maple-board 2966031555, black on the ebony-board 2966801500), so this is the same pickup model the guitar ships with. Duncan make Trembuckers with 52.6mm pole spacing on slightly larger bobbins and baseplate than a standard humbucker, so a like-for-like Trembucker suits the existing pickguard cut-out and route. Four-conductor cable, so the push/pull coil split keeps working.

Jackson

Soloist SL2 2022

Likely drop-in

Soldering

The same bridge pickup this guitar ships with, so it fits the existing route. You will need to solder it in.

Why we say this

Retailer listings reproducing Jackson's spec for the Pro Series Soloist SL2 list a Seymour Duncan Distortion TB-6 in the bridge and an SH-6N in the neck, so this is the same bridge pickup model the guitar ships with. Duncan make Trembuckers with 52.6mm pole spacing for Floyd Rose bridges like this guitar's 1000 Series, on slightly larger bobbins and baseplate than a standard humbucker, so a like-for-like Trembucker suits the existing route. Four-conductor cable.

Help improve this data

Nothing is flagged as an open question here right now. If you have fitted something to this Seymour Duncan Distortion Trembucker TB-6 (Black) that we haven't covered, send it in.