Bridge

    Faber ABRM Tune-o-Matic Bridge

    Faber's Tune-O-Matic replacement built for non-USA imports with 4mm metric bridge posts mounted directly into the body, such as Epiphone, Tokai, and Ibanez.

    8 guitars checked: 1 likely drop-in, 1 needs verification, 6 not compatible.

    For your Schecter C-1 Hellraiser

    Needs verification

    This bridge is built for import guitars with direct-mounted posts. Whether that matches your guitar's TonePros bridge studs hasn't been confirmed. Measure before ordering.

    See the full notes below
    Faber ABRM Tune-o-Matic Bridge

    Where to buy

    Reverb

    See current price at ReverbIn stock
    View at Reverb

    We may earn a commission if you buy through links on this page. It doesn't change the price you pay. How we make money

    Part specs

    String spacing

    52mm

    Confirmed

    Mounting hole spacing

    73.6mm

    Confirmed

    Bridge type

    Tune-O-Matic (metric import spec, 4mm posts, not true ABR-1)

    Confirmed

    Guitars we've checked

    8 guitars checked: 1 likely drop-in, 1 needs verification, 6 not compatible.

    Epiphone Casino

    Epiphone

    Casino 2020

    Likely drop-in

    Built for the smaller bridge posts this guitar actually uses, a well known upgrade for this exact Casino era.

    Why we say this

    This bridge is explicitly built for the 4mm bridge posts used on Epiphone and other import guitars before their recent hardware revisions. The 2020 and pre-2023 Casino is the exact pre-revision guitar that describes. Epiphone changed the Casino's bridge posts from 4mm to 6mm during 2023, so the two generations take genuinely different bridges, and this one is built for the earlier, narrower posts.

    Schecter

    C-1 Hellraiser 2022

    Needs verification

    This bridge is built for import guitars with direct-mounted posts. Whether that matches your guitar's TonePros bridge studs hasn't been confirmed. Measure before ordering.

    Why we say this

    This guitar ships with a metric TonePros T3BT bridge. This is Faber's ABRM, built for import guitars with 4mm bridge posts mounted directly into the body, no bushings, not an ABR-1-spec part as the previous note here incorrectly stated. Whether this guitar's TonePros studs match the ABRM's direct-mount spec has not been independently confirmed either way.

    Help confirm this fit

    Not compatible
    Epiphone Casino (2023+)

    Epiphone

    Casino (2023+) 2023

    A well known Casino upgrade, but it is sized for the older, smaller 4mm bridge posts. Owner measurements show 2023 and later Casinos have larger 6mm posts, so this bridge will not fit them. Look for a bridge built for the larger post size instead.

    Why we say this

    A well regarded Casino bridge upgrade, but it is built for the 4mm post size used before the 2023 hardware change. An owner who measured a 2023 Casino reports 6mm posts, so this bridge will not fit them. That is a single owner measurement, though it fits with 4mm posts reported on a 2021 Casino Worn. Most existing Casino buying guides still point to this bridge without noting the hardware split.

    Not compatible
    Gibson Les Paul Classic

    Gibson

    Les Paul Classic 2023

    This bridge is built for import guitars like Epiphone, not genuine Gibson ABR-1 posts. It won't fit here. The Gotoh GE104B ABR-1 bridge is the right match for this guitar instead.

    Why we say this

    This ABRM is Faber's spec for non-USA imports with 4mm bridge posts mounted directly into the body, no bushings, such as Epiphone, Tokai, and Ibanez. This guitar's genuine Gibson ABR-1 bridge posts are a different system entirely, not an import direct-mount, so this is a wrong-product match rather than a fitment gray area. Faber's own ABRH is the model built for true ABR-1 posts. Gotoh's GE104B ABR-1 Tune-O-Matic is the correct ABR-1 spec alternative and is confirmed Likely drop-in for this guitar.

    Not compatible

    This bridge is built for import guitars like Epiphone, not genuine Gibson ABR-1 posts. It won't fit here. The Gotoh GE104B ABR-1 bridge is the right match for this guitar instead.

    Why we say this

    This ABRM is Faber's spec for non-USA imports with 4mm bridge posts mounted directly into the body, no bushings, such as Epiphone, Tokai, and Ibanez. This guitar's genuine Gibson ABR-1 bridge posts are a different system entirely, not an import direct-mount, so this is a wrong-product match rather than a fitment gray area. Faber's own ABRH is the model built for true ABR-1 posts. Gotoh's GE104B ABR-1 Tune-O-Matic is the correct ABR-1 spec alternative and is confirmed Likely drop-in for this guitar.

    Not compatible

    This bridge is built for import guitars like Epiphone, not genuine Gibson ABR-1 posts. It won't fit here. The Gotoh GE104B ABR-1 bridge is the right match for this guitar instead.

    Why we say this

    This ABRM is Faber's spec for non-USA imports with 4mm bridge posts mounted directly into the body, no bushings, such as Epiphone, Tokai, and Ibanez. This guitar's genuine Gibson ABR-1 bridge posts are a different system entirely, not an import direct-mount, so this is a wrong-product match rather than a fitment gray area. Faber's own ABRH is the model built for true ABR-1 posts. Gotoh's GE104B ABR-1 Tune-O-Matic is the correct ABR-1 spec alternative and is confirmed Likely drop-in for this guitar.

    Not compatible
    Gibson SG Standard

    Gibson

    SG Standard 2023

    This bridge is built for import guitars like Epiphone, not genuine Gibson posts. It won't fit here, independent of the open question about whether this guitar's bridge is ABR-1 or Nashville spec.

    Why we say this

    This ABRM is Faber's spec for non-USA imports with 4mm bridge posts mounted directly into the body, no bushings, such as Epiphone, Tokai, and Ibanez. This guitar is a genuine Gibson, which uses bushing-mounted posts either way this bridge's own unresolved ABR-1-vs-Nashville spec question resolves. The import direct-mount architecture this bridge is built for does not apply here regardless of that separate dispute, so this is a wrong-product match, not a fitment gray area.

    Not compatible

    This bridge is built for import guitars like Epiphone, not genuine Gibson posts. It won't fit here, independent of the open question about whether this guitar's bridge is ABR-1 or Nashville spec.

    Why we say this

    This ABRM is Faber's spec for non-USA imports with 4mm bridge posts mounted directly into the body, no bushings, such as Epiphone, Tokai, and Ibanez. This guitar is a genuine Gibson, which uses bushing-mounted posts either way this bridge's own unresolved ABR-1-vs-Nashville spec question resolves. The import direct-mount architecture this bridge is built for does not apply here regardless of that separate dispute, so this is a wrong-product match, not a fitment gray area.

    This page has 1 open question

    If you have fitted any of these to this Faber ABRM Tune-o-Matic Bridge, tell us what you found and we'll update the data.