A common tuning-stability upgrade for PRS SE guitars. Should fit without modification.
Why we say this
Matches the standard PRS SE-tier tuner spec used across the current SE line.
Tuner
PRS SE locking tuners (3x3)
PRS's own locking upgrade for SE guitars, built to look like the Core hardware but sized for the SE tuner footprint.
6 guitars checked: 4 likely drop-in, 1 needs verification, 1 not compatible.
For your PRS SE Hollowbody II
Likely drop-inA common tuning-stability upgrade for PRS SE guitars. Should fit without modification.
See the full notes below
Where to buy
Andertons
£99.99In stock
We may earn a commission if you buy through links on this page. It doesn't change the price you pay. How we make money
Part specs
Tuner hole size
Not published
Needs verificationGear ratio
15:1 (per PRS's own forum discussion; some third-party sources list 18:1 instead, genuine ambiguity across sources)
Installation notes
Slide into 10 mm headstock holes with supplied bushings. Locator screw matches SE factory footprint. Install with a Phillips screwdriver and string winder.
Guitars we've checked
6 guitars checked: 4 likely drop-in, 1 needs verification, 1 not compatible.
A common tuning-stability upgrade for PRS SE guitars. Should fit without modification.
Why we say this
Matches the standard PRS SE-tier tuner spec used across the current SE line.
A common tuning-stability upgrade for PRS SE guitars. Should fit without modification.
Why we say this
Matches the standard PRS SE-tier tuner spec used across the current SE line.
A common tuning-stability upgrade for PRS SE guitars. Should fit without modification.
Why we say this
Matches the standard PRS SE-tier tuner spec used across the current SE line.
Owner reports are mixed on this guitar. One owner says PRS confirmed these fit, another says one screw hole had to be drilled. The Kluson non-collared locking tuners are the safer no-drill choice here. Note these are chrome, while the stock hardware is nickel.
Why we say this
Changed from Not compatible on 2026-09-29. Previous note claimed the vintage-style layout ruled it out, but PRS forum reports conflict: one owner says PRS confirmed 106297 fits the SE 594, another says a new screw hole is needed. Not strong enough to assert either way.
Help confirm this fit
Not compatibleGenuine PRS Part
PRS
SE Zach Myers 2024
Not a match for the SE Zach Myers. This model uses a vintage-style tuner layout rather than the standard SE one, so these genuine PRS SE tuners are not a straight swap here, despite the PRS name.
Why we say this
Two independent PRS parts sellers state this exact SKU (PRS 106297--C-003) does not fit the SE Zach Myers: Andertons (excludes McCartys, Zach Myers and Paul's Guitar) and John Mann's Guitar Vault (excludes Paul's Guitar, Zach Myers and Bernie Marsden). Forum reports describe the Zach Myers using a vintage-style tuner footprint distinct from the standard SE layout. Previous Likely drop-in verdict was matched by SE-family resemblance rather than the SKU's stated exclusions.
What fits instead
This page has 1 open question
If you have fitted any of these to this PRS SE locking tuners (3x3), tell us what you found and we'll update the data.