A PAF-style humbucker pair modeled on Seymour Duncan's reproduction of the original Gibson PAF wind, voiced for warm, open cleans and a smooth breakup rather than high output.
4 guitars checked: 4 likely drop-in.
For your Hagstrom Swede
Likely drop-inA vintage PAF-style alternative to the stock Lundgren pickups. Fits the same standard humbucker route. You will need to solder it in.
See the full notes belowWhere to buy
Andertons
Checked 29 days ago
Pickup type
Humbucker
ConfirmedDimensions (L × W × D)
Not published
Needs verification4 guitars checked: 4 likely drop-in.
A vintage PAF-style alternative to the stock Lundgren pickups. Fits the same standard humbucker route. You will need to solder it in.
Lundgren's pickups are built and sold to fit standard Gibson-style humbucker mounting, confirmed by owner reports of installing them into Les Paul-family guitars, so a standard-size PAF-style set like the Seth Lover should mount into the same route the same way.
A vintage PAF-style alternative to the stock Lundgren pickups. Fits the same standard humbucker route. You will need to solder it in.
Lundgren's pickups are built and sold to fit standard Gibson-style humbucker mounting, confirmed by owner reports of installing them into Les Paul-family guitars, so a standard-size PAF-style set like the Seth Lover should mount into the same route the same way.
A vintage PAF-style alternative to the stock Custom 62 pickups. Fits the same standard humbucker route. You will need to solder it in.
A real Ultra Swede owner listing documents pulling the stock Custom 62 pickups and installing a Seymour Duncan Seth Lover set with no mention of route or mounting changes needed. This guitar's pickup route is a standard humbucker mount and cavity, the same basis used for the Pearly Gates and Hot Rodded JB/Jazz sets listed for this guitar.
A vintage PAF-style option. At least one real owner has made this exact swap into a Hagstrom HJ-50-equipped semi-hollow and reported a clean fit using the stock hardware, though it is not manufacturer-confirmed. You will need to solder it in.
At least one owner report describes pulling stock HJ-50 pickups from a Hagstrom HJ-50-equipped semi-hollow and replacing them with Seymour Duncan Seth Lovers, with the pickups coming out cleanly using the stock mounting rings and screws. This is a single first-hand report rather than a manufacturer-confirmed fit, but it is a real, specific data point for this exact swap, not an inference from general humbucker sizing.
Nothing is flagged as an open question here right now. If you have fitted something to this Seth Lover Humbucker Set that we haven't covered, send it in.
