The S670QM carries forward the S series' signature thin, contoured body, one of the lightest and most compact-feeling shapes Ibanez makes.
11 mods reviewed: 3 drop-in, 6 need verification, 2 not compatible.
The S670QM carries forward the S series' signature thin, contoured body, one of the lightest and most compact-feeling shapes Ibanez makes. It uses the Edge Zero II, the modern standard double-locking trem found on most current Ibanez guitars, a different cavity route from the original Edge or Edge Pro variants used on older or reissue models, so it's not a universal swap with vintage Ibanez trem parts.
Tailpiece
None (bridge-integrated, locking trem)
Neck mounting
Bolt-on
Scale length
25.5" (648mm)
Tuner hole size
10mm (25/64")
Nut width
43mm (1.693")
Not published by Ibanez: string spacing and bridge mounting spacing. Measure these before buying a bridge.
We may earn a commission if you buy through links on this page. It doesn't change the price you pay. How we make money
A different double-locking bridge design than what's stock here. Confirm stud spacing before ordering.
Floyd Rose's Rail Tail is a different double-locking design than the stock Edge Zero II, mounting stud compatibility between the two systems has not been independently confirmed.
Help confirm this fit
Fits the standard humbucker route. Needs soldering, not a plug-and-play part.
Standard humbucker footprint, direct fit for the stock HSH route.
Fits the standard humbucker route. Needs soldering, not a plug-and-play part.
Standard humbucker footprint, direct fit for the stock HSH route.
See current price at Reverb
View at ReverbThis guitar's other options are both for the humbucker positions. This is a middle-position single-coil option, likely fit based on typical sizing for this pickup layout, worth confirming before buying.
This guitar's two existing pickup options both cover the bridge and neck humbucker positions. This is a standard Strat-sized stacked single-coil, likely fit for the middle position based on typical Ibanez HSH middle-pickup sizing, but not independently confirmed against this specific model's middle route.
Help confirm this fit
Matches the tuner holes already on this guitar. A straightforward upgrade, no drilling needed.
Matches the confirmed 10mm bore used on this guitar's Edge Zero II-equipped headstock.
See current price at Amazon
View at AmazonHole size should match, but this guitar has a pointed reverse headstock. Confirm the correct InvisoMatch plate variant before ordering.
Ibanez pointed reverse headstock, screw hole alignment not guaranteed even with an adapter plate unless the correct variant is used.
Help confirm this fit
See current price at Amazon
View at AmazonHole size should match, but this guitar has a pointed reverse headstock where aftermarket tuner screw holes sometimes do not line up with the factory ones. Worth checking before ordering.
Ibanez pointed reverse headstock. Owner reports on this headstock style describe aftermarket tuner screw holes not lining up with factory pilot holes even when post diameter matches.
Help confirm this fit
See current price at Amazon
View at AmazonHole size should match, but this guitar has a pointed reverse headstock where aftermarket tuner screw holes sometimes do not line up.
Ibanez pointed reverse headstock, screw hole alignment not guaranteed.
Help confirm this fit
See current price at Reverb
View at ReverbHole size should match, but this guitar has a pointed reverse headstock where aftermarket tuner screw holes sometimes do not line up.
Ibanez pointed reverse headstock, screw hole alignment not guaranteed.
Help confirm this fit
If you have fitted any of these to this Ibanez S670QM, tell us what you found and we'll update the data.
