Modio Pick LogoModio
    Fender

    Player Plus Telecaster2022

    The Player Plus Telecaster gives the classic Tele twang a quieter, more modern edge, using Player Plus Noiseless pickups and a push-pull tone control that switches both pickups into series wiring for a fatter, higher-output tone, again not standard Tele wiring.

    12 mods reviewed: 10 drop-in, 2 need verification.

    Drop a hero product shot

    The Player Plus Telecaster gives the classic Tele twang a quieter, more modern edge, using Player Plus Noiseless pickups and a push-pull tone control that switches both pickups into series wiring for a fatter, higher-output tone, again not standard Tele wiring. It shares the same locking tuners as the Player Plus Stratocaster.

    Quick facts

    Tailpiece

    None (bridge-integrated, string-through)

    Neck mounting

    4-bolt

    String spacing

    54mm (2-1/8")

    Scale length

    25.5" (648mm)

    Nut width

    42.8mm (1.685")

    Not published by Fender: tuner hole size and bridge mounting spacing. Measure these before buying tuners or a bridge.

    Watch out

    Ships with Fender Deluxe Cast/Sealed Locking tuners (short-post design), a different mounting design than the 2-pin staggered locking tuners used on Player/American Professional II necks. Exact peghole diameter for this specific tuner design has not been independently confirmed.

    We may earn a commission if you buy through links on this page. It doesn't change the price you pay. How we make money

    Bridge

    6 options
    Illustration, photo coming soon

    Fender 6-Saddle Telecaster Hardtail Bridge, Standard Spacing

    Likely drop-in

    This guitar's stock bridge is the same modern 6-saddle Telecaster style at the wider spacing this bridge is built for, so it should be a straightforward swap.

    Why we say this

    Guitar uses the modern ~54mm 6-saddle Telecaster bridge spacing, matching this part's target spec. Modern 6-saddle Tele spacing is well corroborated but treated as Likely rather than Confirmed, per established hardware-family notes, since Fender does not publish an exact spacing figure on most modern Tele product pages.

    See current price at Amazon

    View at Amazon
    Illustration, photo coming soon

    Gotoh BS-TC1S In-Tune Telecaster Bridge

    Likely drop-in

    A popular intonation upgrade for Tele-style bridges. Uses the existing mounting holes.

    Why we say this

    Standard 3-hole Tele mount with compensated in-tune saddles, one of the most commonly recommended intonation upgrades for this bridge style.

    Illustration, photo coming soon

    Mastery M3 Tele Bridge

    Likely drop-in

    This guitar uses the traditional 4-screw mounting pattern this bridge is built for, should be a straightforward swap.

    Why we say this

    Player-tier Telecasters are built in Mexico on the traditional 4-screw vintage-compatible mounting pattern, confirmed distinct from the 3-screw American Standard/Ultra pattern. This vintage-style 4-screw bridge should align with the existing holes.

    Illustration, photo coming soon

    Joe Barden Telecaster Bridge Plate

    Likely drop-in

    A boutique alternative to Wilkinson and Gotoh Tele bridges, uses the same mounting holes as the stock bridge.

    Why we say this

    A well regarded boutique Tele bridge plate using the same standard 3-hole mount as nearly every Tele bridge, including this one.

    Illustration, photo coming soon

    Callaham Vintage T Model Tele Bridge Assembly

    Likely drop-in

    This guitar uses the traditional 4-screw mounting pattern this bridge is built for, should be a straightforward swap.

    Why we say this

    Player-tier Telecasters use the traditional 4-screw vintage-compatible mounting pattern, matching this bridge's mount.

    Wilkinson WTB Telecaster Bridge

    Wilkinson WTB Telecaster Bridge

    Likely drop-in

    Worth knowing before you buy, this is a vintage-style bridge with 3 saddles instead of your stock 6, so you lose some independent per-string intonation adjustment in exchange for classic Tele tone. It mounts using your existing holes.

    Why we say this

    This is a vintage-style 3-saddle bridge, mounted using the standard 4-hole Telecaster pattern shared across the line, but it replaces this guitar's stock 6 individually-adjustable saddles with 3 compensated ones, a real change in saddle count and intonation adjustability, not a like-for-like modern bridge swap. The mounting pattern itself matches, so it physically fits.

    See current price at Amazon

    View at Amazon

    Pickup

    3 options
    Illustration, photo coming soon

    Fender Gen 4 Noiseless Telecaster Pickup Set

    Likely drop-in
    Soldering

    A hum-cancelling option that fits the existing Tele pickup route. Still needs soldering to install.

    Why we say this

    Genuine Fender hum-cancelling Tele set built to the standard Tele single-coil footprint, direct fit for the stock route.

    £179.00 at Andertons

    View at Andertons
    Illustration, photo coming soon

    Seymour Duncan Antiquity II Telecaster Pickup Set

    Likely drop-in
    Soldering

    Fits the standard Tele pickup route. Needs soldering, not a plug-and-play part.

    Why we say this

    Standard single-coil Tele-shaped set, drops into the same route as the stock pickups.

    See current price at Reverb

    View at Reverb
    Illustration, photo coming soon

    Seymour Duncan JB Jr. for Tele (Bridge)

    Likely drop-in
    Soldering

    A genuine humbucker squeezed into the stock Tele bridge slot, for players who want humbucker output without routing the body. Bridge position only. Needs soldering.

    Why we say this

    A true dual-coil humbucker built into a single-coil-sized housing, drops into the standard Tele bridge single-coil route without any body routing. Bridge position only, does not replace the neck pickup.

    See current price at Amazon

    View at AmazonAlso at Andertons.

    Tuner

    3 options
    Illustration, photo coming soon

    Graph Tech Ratio Machine Heads (6-in-line, Staggered)

    Likely drop-in

    Comes with different-sized bushings in the box, built to handle small bore variations without needing an exact match.

    Why we say this

    Ships with interchangeable bushings sized for the range of bore diameters used across current Fender tuner holes, sidestepping exact hole-size questions.

    See current price at Amazon

    View at Amazon
    Fender Deluxe Locking Tuners (6-in-line, Staggered)

    Fender Deluxe Locking Tuners (6-in-line, Staggered)

    Needs verification

    This guitar already has factory locking tuners, but they are a different design than this part assumes. Confirm your peghole size before ordering.

    Why we say this

    This guitar ships with a different factory locking tuner design (short-post) than the 2-pin staggered locking tuners this part is built around. Bore compatibility has not been independently confirmed for this specific tuner design.

    Help confirm this fit

    See current price at Amazon

    View at Amazon
    Illustration, photo coming soon

    Sperzel Trim-Lok Locking Tuners (6-in-line, Staggered)

    Needs verification

    This guitar already has factory locking tuners of a different design. Confirm your peghole size before ordering.

    Why we say this

    This guitar ships with a different factory locking tuner design (short-post) than Sperzel's standard 10mm line assumes. Bore compatibility has not been independently confirmed.

    Help confirm this fit

    This page has 2 open questions

    If you have fitted any of these to this Fender Player Plus Telecaster, tell us what you found and we'll update the data.